Toll-Free (877) 606-7846 | (321) 939-3244
Rental Knee CPM
Continuous Passive Motion (CPM) devices are used during the first phase of rehabilitation following a manipulation, soft tissue surgical procedure or trauma. CPM's constantly move the joints through a controlled range of motion; the exact range is dependent upon the joint and controlled by the user by following physician’s instructions. In most cases the range of motion is increased over time. Speed, pause and other variables can also be programmed.
The goals CPM usage are:
- Control post-operative pain
- Reduce inflammation
- Provide passive motion in a specific plane of movement
- Protect the healing repair or tissue
- Helps prevent scar tissue formation
- Improves Range of Motion (ROM)
- Improve joint recovery
- Improve surgery success
CPM's mechanisms of action for aiding joint recovery are dependent upon what surgery is performed. One mechanism is the movement of synovial fluid to allow for better diffusion of nutrients into damaged cartilage, and diffusion of other materials out; such as blood and metabolic waste products. Another mechanism is the prevention of fibrous scar tissue formation in the joint, which tends to decrease the range of motion for a joint.
CPM therapy benefits patients by facilitating earlier motion and earlier return to normal function. These patients also have less pain, swelling, edema, and reduction of scarring/adhesion formation. OrthoSTAT, Corp. provides CPM equipment for the Ankle, Elbow, Hand, Hip, Knee, Shoulder, Toe and Wrist.
Knee CPM Machine indications:
- Post-op. ACL,PCL,MCL Ligament Reconstruction with a Tendon Graft
- Post-op. Total Knee Replacement
- Post-op. Arthrotomy and Drainage for Acute Septic Arthritis
- Post-op. ORIF of Displaced Intra-articular and Diaphyseal / Metaphyseal fractures
- Post-op. Arthrotomy, Capsulotomy, Arthrolysis and Debridement for Post-traumatic Arthritis
- Post-op. Synovectomy for Rheumatoid Arthritis and Heophilic Athropathy
- Post-op. Incision and Drainage for Acute Tenosynovitis
- Post-op. Reconstructive Tendon, Ligament, Cartilage and Bone Surgery
- Post-op. Knee Ankylosis Manipulation
- Post-op. Release of Extra-articular Joint Contractures (Quadricepsplasty)
- Post-op. Medial/Lateral Meniscus repairs
- Post-op. Tibial Plateau Fracture ORIF
- Post-op. Patella Fracture ORIF
* If renting more than one of the same unit, please, “Checkout” & create additional reservation(s) *
2 Weeks, 3 Weeks & 4 Weeks Rental options
Please call (321) 939-3244 with questions or fill out the form below to make a Rental Inquiry.
Continuous Passive Motion (CPM) devices are used during the first phase of rehabilitation following a manipulation, soft tissue surgical procedure or trauma. CPM's constantly move the joints through a controlled range of motion; the exact range is dependent upon the joint and controlled by the user by following physician’s instructions. In most cases the range of motion is increased over time. Speed, pause and other variables can also be programmed.
The goals CPM usage are:
- Control post-operative pain
- Reduce inflammation
- Provide passive motion in a specific plane of movement
- Protect the healing repair or tissue
- Helps prevent scar tissue formation
- Improves Range of Motion (ROM)
- Improve joint recovery
- Improve surgery success
CPM's mechanisms of action for aiding joint recovery are dependent upon what surgery is performed. One mechanism is the movement of synovial fluid to allow for better diffusion of nutrients into damaged cartilage, and diffusion of other materials out; such as blood and metabolic waste products. Another mechanism is the prevention of fibrous scar tissue formation in the joint, which tends to decrease the range of motion for a joint.
CPM therapy benefits patients by facilitating earlier motion and earlier return to normal function. These patients also have less pain, swelling, edema, and reduction of scarring/adhesion formation. OrthoSTAT, Corp. provides CPM equipment for the Ankle, Elbow, Hand, Hip, Knee, Shoulder, Toe and Wrist.
Knee CPM Machine indications:
- Post-op. ACL,PCL,MCL Ligament Reconstruction with a Tendon Graft
- Post-op. Total Knee Replacement
- Post-op. Arthrotomy and Drainage for Acute Septic Arthritis
- Post-op. ORIF of Displaced Intra-articular and Diaphyseal / Metaphyseal fractures
- Post-op. Arthrotomy, Capsulotomy, Arthrolysis and Debridement for Post-traumatic Arthritis
- Post-op. Synovectomy for Rheumatoid Arthritis and Heophilic Athropathy
- Post-op. Incision and Drainage for Acute Tenosynovitis
- Post-op. Reconstructive Tendon, Ligament, Cartilage and Bone Surgery
- Post-op. Knee Ankylosis Manipulation
- Post-op. Release of Extra-articular Joint Contractures (Quadricepsplasty)
- Post-op. Medial/Lateral Meniscus repairs
- Post-op. Tibial Plateau Fracture ORIF
- Post-op. Patella Fracture ORIF
Only logged in customers who have purchased this product may leave a review.
Related Products
Rental Toe CPM
RENT CPM's
Learn More
Continuous Passive Motion (CPM) devices are used during the first phase of rehabilitation following a manipulation, soft tissue surgical procedure or trauma. CPM's constantly move the joints through a controlled range of motion; the exact range is dependent upon the joint and controlled by the user by following physician’s instructions. In most cases the range of motion is increased over time. Speed, pause and other variables can also be programmed.
The goals CPM usage are:
- Control post-operative pain
- Reduce inflammation
- Provide passive motion in a specific plane of movement
- Protect the healing repair or tissue
- Helps prevent scar tissue formation
- Improves Range of Motion (ROM)
- Improve joint recovery
- Improve surgery success
CPM's mechanisms of action for aiding joint recovery are dependent upon what surgery is performed. One mechanism is the movement of synovial fluid to allow for better diffusion of nutrients into damaged cartilage, and diffusion of other materials out; such as blood and metabolic waste products. Another mechanism is the prevention of fibrous scar tissue formation in the joint, which tends to decrease the range of motion for a joint.
CPM therapy benefits patients by facilitating earlier motion and earlier return to normal function. These patients also have less pain, swelling, edema, and reduction of scarring/adhesion formation. OrthoSTAT, Corp. provides CPM equipment for the Ankle, Elbow, Hand, Hip, Knee, Shoulder, Toe and Wrist.
Toe CPM Machine indications:
- Post-op. Bunionectomy
- Post-op. Joint Replacement
- Post-op. Reconstructive surgery on bone, cartilage, tendons and ligaments
- Post-op. Manipulation
Rental ThermoTek VascuTherm 5 Unit
Rent Medical Equipment
Learn More
ThermoTek VascuTherm 5 Thermal Compression Therapy System provides the total solution to DVT/VTE patient management. Completely redesigned with physician driven, customizable therapy profiles, the VascuTherm 5 offers the patient highly effective DVT prophylaxis with intermittent compression.
The VascuTherm™ 5 therapy system is capable of performing therapies for the following:
Pneumatic Compression Therapy for the prevention of DVT and PE:
DVT Compression therapy is used in combination with specially designed therapy wraps to transfer pressure to the calf or foot using compressed air. The preset inflation and deflation cycle of the VascuTherm 5 therapy system simulates natural walking action. This increases blood flow to the heart through the veins of the lower extremities to reduce the risk of clot formation.
Pneumatic Compression Therapy for the Management of Post-Surgical Edema and Lymphedema:
Compression therapy provides compressed air to the therapy wrap and transfers pressure to the treatment site. This added external pressure aids in reducing the pooling of blood and lymphatic fluid in the targeted extremity. The compression treatment provided by the unit uses a preset pressure setting and cycle time
Cold Therapy:
Cold Therapy passes cool fluid through the wrap for the management of pain, discomfort and swelling. If prescribed, Cold therapy can be used in combination with Pneumatic Compression therapy. Temperature range 43 degrees F to 49 degrees F.
Heat Therapy:
Heat Therapy passes 105 degree F fluid through the wrap for the management of pain and discomfort. If prescribed, Heat therapy can be used in combination with Pneumatic Compression therapy.
Thermal Contrast Therapy:
Thermal Contrast Therapy passes fluid through the wrap in an alternating cycle of Cool-Heat-Cool-Heat for the management of pain, discomfort and swelling. During Thermal Contrast Therapy, the unit will cool down the circulating fluid to 49°F for twenty (20) minutes and then heat up to 105°F for ten (10) minutes. This cycle is repeated until the prescribed duration of treatment is completed.
Treatment Modalities
Precise Temperature Control
- Fluid Therapy Temperature Range between 43°F – 49°F to 105°F
Compression Therapy (3 settings)
- Treatment for Edema and Lymphedema in the Upper and Lower Extremities with alternating compression; choice of Low (15 mmHg), Med (30 mmHg) or High (50 mmHg).
DVT Prophylaxis Therapy
- Compression Modality to reduce the risk of DVT formation on the Calf (45mmHg compression) and Foot (100 mmHg compression).
Programmable Therapies
User-Friendly Interface
110-240 VAC, 50/60 Hz Operation
Easy to use and read Touch Screen Display
Quiet Operation
Specifications
Weight: 18.75 lbs.
Dimensions: 6.6” W x 13.2” H x 12” D
Umbilical Hose Length: 7 feet
Hospital Grade Power Cord
Safety: IEC 60601-1
Operating Fluid: 90% Distilled Water/10% Isopropyl Alcohol
Indications
Pain:
Localized thermal therapy (hot or cold) for post traumatic and post-surgical medical and/or surgical conditions.
Edema:
Reduction of edema associated with soft tissue injuries such as burns, post-operative edema and ligament sprains. Treat and assist healing of cutaneous ulceration (wounds), reduce healing time, enhance arterial circulation (blood flow), reduce compartmental pressures, reduce edema (swelling), reduce the need for anticoagulant (blood thinning) medications.
DVT Prophylaxis:
Decrease the risk of deep venous thrombosis (DVT). Aids the blood flow back to the heart.
Lymphedema:
Treatment of disorders associated with vascular or lymphatic insufficiency such as Chronic Venous Insufficiency (CVI), venous stasis ulcers, post-mastectomy edema and chronic lymphedema.
$795.00
Rental 3-Wheel Scooter Go-Go Elite Traveller
3-Wheel Power Scooter Rental, 3-Wheel Power Scooters, Mobility Power Scooter Rental, Power Scooters
| Model | Elite Traveller 3 Wheel | |
| Model Number | SC40E | |
| Front Tires | 2″ x 8″ Solid | |
| Rear Tires | 2.5″ x 8″ Solid | |
| Maximum Speed* | Up to 4 mph | |
| Ground Clearance | 2″ | |
| Turning Radius** | 33″ | |
| Overall Length** | 37″ | |
| Overall Width of Base** | 19.5″ | |
| Seat-to-Ground Height Range | 18.13″-20.13″ | |
| Seat Type | Compact, Foldable (17″x17″) | |
| Weight** | 76 lbs. | |
| Seat-to-Deck Height Range | 15.75″-17.25″ | |
| Battery Weight | 14 lbs. each (18 AH battery pack weighs 29.5 lbs.) |
|
| Battery Requirements | (2)18AH | |
| Maximum Range Per Charge* | Up to 10.4 Miles (18AH) | |
| Battery Charger | Off-board, 2A | |
| Maximum Weight Capacity | 300 lbs. | |
| Standard Body Colors | Red and Blue interchangeable shroud panels |
|
| Weight of Heaviest Piece** | 29.5 lbs. (Rear Section) | |
| Medicare Code Coverage | K0800 – Group 1 Standard | |
| Warranty | Lifetime limited on frame; 2-Year limited on Electronics; 2-Year limited on Drivetrain |
The information contained herein is correct at the time of publication; we reserve the right to alter specifications without prior notice.
*Speed & range vary with user weight, terrain type, battery charge, battery condition and tire pressure.
**Due to manufacturing tolerances and continued product improvement, this specification is subject to a variance of +/- 3%
Learn More$50.00
Rental Shoulder CPM
RENT CPM's
Learn More
Continuous Passive Motion (CPM) devices are used during the first phase of rehabilitation following a manipulation, soft tissue surgical procedure or trauma. CPM's constantly move the joints through a controlled range of motion; the exact range is dependent upon the joint and controlled by the user by following physician’s instructions. In most cases the range of motion is increased over time. Speed, pause and other variables can also be programmed.
The goals CPM usage are:
- Control post-operative pain
- Reduce inflammation
- Provide passive motion in a specific plane of movement
- Protect the healing repair or tissue
- Helps prevent scar tissue formation
- Improves Range of Motion (ROM)
- Improve joint recovery
- Improve surgery success
CPM's mechanisms of action for aiding joint recovery are dependent upon what surgery is performed. One mechanism is the movement of synovial fluid to allow for better diffusion of nutrients into damaged cartilage, and diffusion of other materials out; such as blood and metabolic waste products. Another mechanism is the prevention of fibrous scar tissue formation in the joint, which tends to decrease the range of motion for a joint.
CPM therapy benefits patients by facilitating earlier motion and earlier return to normal function. These patients also have less pain, swelling, edema, and reduction of scarring/adhesion formation. OrthoSTAT, Corp. provides CPM equipment for the Ankle, Elbow, Hand, Hip, Knee, Shoulder, Toe and Wrist.
Shoulder CPM Machine indications:
- Post-op. Rotator Cuff Repair
- Post-op. Labral Repair
- Post-op. SLAP Repair Due to Shoulder Dislocation
- Post-op. Manipulation for Shoulder Adhesive Capsulitis
- Post-op. Shoulder Decompression for Impingement Syndrome
- Post-op. Distal Clavicle Recession
Reviews
There are no reviews yet.